DJI Ronin-MX 3-Axis Gimbal Stabilizer

$2,239.00

  • Supports Cameras up to 10 Pounds
  • Compatible with Matrice 600
  • Robust Magnesium Construction
  • Radio Controller for Second Operator
  • iOS / Android App-Based Control
  • SmoothTrack Technology
  • Upright, Underslung, and Briefcase Modes
  • Supports Mounting of Second DJI Battery
  • USB and D-Tap Power Outputs
  • Universal Mount for Jibs, Car Mounts

On Backorder

SKU: 18576 Categories: , Tags: , ,

The Ronin-MX from DJI is dual-use gimbal suitable both for mounting on the Matrice 600 aerial platform as well as deployment closer to the ground. Improving over the Ronin-M, it features magnesium construction to yield high rigidity while keeping the weight down. The gimbal is suitable for cinema cameras, mirrorless cameras, and DSLRs weighing up to 10 pounds. Out of the box it supports two-operator operation, and includes a radio controller (transmitter) for the camera operator. There is also an optional Thumb Controller (available separately) for solo operation. When installed on the Matrice 600 aircraft, the gimbal can be controlled via the DJI GO app. An included universal mounting adapter allows it to be adapted for use with jibs, car mounts, and various other types of camera support equipment. There is also a handlebar for handheld use.

Built to Perform
360° Freedom of Movement
Wireless Control and Transmission
App Control
Refined Balance
Magnesium Construction
Strengthened Motors and ESCs
External Camera Battery
Intelligent Batteries
Built-In Power Distribution
Solo Mode with Optional Thumb Controller
Second Operator Control
Three Operation Modes
SmoothTrack Technology
Universal Mounting
Short Range Wireless Transmission
Package Weight 20.0 lbs
Package Dimensions 18.583 x 17.244 x 11.575 in
Load Weight (Reference Value)

10 lb / 4.5 kg

Angular Vibration Range

± 0.02°

Maximum Controlled Rotation Speed

Pan Axis: 200°/s Tilt Axis: 100°/s Roll Axis: 30°/s

Mechanical Endpoint Range

Pan Axis Control: 360° Tilt Axis Control: +270° to -150° Roll Axis Control: ± 110°

Controlled Rotation Range

Pan Axis Control: 360° Tilt Axis Control: +45° to -135° Roll Axis Control: ± 25°

Sensors

Temperature sensor

Processing

32-Bit DSP Processor

Expandability

D-Bus receiver supported

Working Current

Static Current: 300 mA (at 16 V) Dynamic Current: 600 mA (at 16 V) Locked Motor Current: Up to 10 A (at 16 V)

Frequency

2.4 GHz

Wireless

Bluetooth 4.0

Wired

1 x USB 2.0

Power Requirements

4S Ronin-M battery

Assistant Software

Windows XP or above Mac OS X 10.9 or above iOS 7.1 or above Android 4.3 or above

Control Modes

Underslung Mode Upright Mode Briefcase Mode Aerial Mode Jib or Wirecam Mode

Accessory Power Ports

2 x 12 V Regulated P-Tap 1 x USB 500 mW 1 x DJI Lightbridge

Camera Tray Dimensions

Maximum depth from the center of gravity on camera base plate: 4.7″ / 120 mm Maximum height measured from top of camera base plate: 7.7″ / 195 mm Maximum width: 6.3″ / 160 mm

Operating Temperature

5 to 120°F / -15 to 50°C

Dimensions (W x D x H)

Excluding Handle Bar: 11 x 14.6 x 13.4″ / 280 x 370 x 340 mm Including Handle Bar: 22 x 14.6 x 17.3″ / 560 x 370 x 440 mm

Weight

Including Handle Bar: 6.11 lb / 2.77 kg Including Vibration Damper: 4.74 lb / 2.15 kg

Reviews


There are no reviews yet.

Be the first to review “DJI Ronin-MX 3-Axis Gimbal Stabilizer”