No products in the cart.
Profoto D2 1000Ws AirTTL Monolight
- 1000Ws Monolight, 300W Modeling Lamp
- Built-In AirTTL Radio Receiver
- 0.03-1.2 Sec Recycling
- 1/50,000 Sec Freeze Mode Flash Duration
- Quick Burst: Up to 20 Frames per Second
- 10-Stop Power Range: 2-1000Ws
- High Speed Sync to 1/8000 Sec
- High Resolution Display
- Compatible with 120+ Light Shaping Tools
- 100-240 VAC
Low in stock
Having wowed us with the introduction of the battery-powered TTL B1 and B2 flash heads, Profoto does it again with the AC powered D2 1000 AirTTL Monolight. Building on the foundation of the popular D1, this light maxes-out the D1 performance specs while adding wireless TTL from the B1 and B2. With the D2, “speed” is the operative word.
The D2 1000 recycles to full power in 1.2 seconds, almost half the time as the D1 1000, and in Freeze Mode, achieves flash durations as short as 1/50,000 of a second, outperforming most studio pack systems. That’s good news for special effects photographers and sports shooters. It can also shoot bursts of 20 flashes per second so you’re sure to capture peak action or several versions of it. In addition, the D2 also supports High Speed Sync up to 1/8000 of a second for photographers who want to stop action or use wide apertures with full ambient light control. The 10-stop power range gives ample choices to achieve your objective.
Besides super-fast operation, the D2 shortens your shooting time with on-board TTL compatibility. Pros who formerly turned their noses up at the term “point-and-shoot” as amateurish will learn to love this technology. Simply set your lights up, set the camera to TTL and shoot. The first shot is nearly always a keeper. The key to this control is the optional Air Remote TTL-C (for Canon) or TTL-N (for Nikon). Operating on 2.4 GHz bandwidth, the wireless transmitter, really a controller, has 8 frequency channels and with 6 groups and a range of up to 330′ for TTL triggering and 1000′ for normal triggering. Each channel has power ratio capability of +/- 2 stops. If you prefer to use manual, you have 10 stops of power variation.
The D2 also features an enhanced, intuitive LCD screen display. Modeling Light, Ready Indicator, Mode, Sync, Channel, and Group are easily selected through the Settings button. The display even flips around the way your iPhone does in case you’re working with the head upside down or hanging it overhead. The D2 has a self-seeking multi-voltage (100-240) power supply for worldwide use, too. Profoto has covered so many features on the photographers wish list that you’ll wonder what they can come up with next.
8 Channels / 6 Groups (A-F) Yes, via optional Air Remote TTL-C/N, Air remote, Air USB (Profoto Studio) Up to 1000′ (300 m) for normal triggering Up to 330′ (100 m) for TTL with optional Air Remote TTL-C/N
|Flash Ready Indicator||
Beep tone, ready light, modeling light dimming
300 W halogen
12.2 x 5.1 x 7.1″ (31 x 13 x 18 cm)
|User Replaceable Flashtube||
|Max Sync Speed||
Up to 1/250 sec in Normal mode Up to 1/8000 sec in High Speed mode
10 stops in 1/10 or 1 Stop increments 1-10 power level, 2.0-1000 Ws
Air radio slaves, optical (IR), sync cord
77 degrees with built-in reflector and opal protective glass
LCD Indicators for: Power in 1 stop and 1/10 stop increments Settings Button (Modeling Light, Ready Alert, Sync, Group A-F, Channels 1-8) Test, On/Off button Power Dial
100-240 VAC, 50/60 Hz, self-sensing
7.5 lb (3.4 kg)
Minimum/Maximum: 0.03-1.2 sec Quick Burst Mode: 20 frames per sec
|Modeling Light Control||
Off / Proportional / Free / Max
Adaptive thermal control
(t0.5): 1/1600 sec in Normal mode max power – 1/50,000 sec in Freeze mode min power