Rode Stereo VideoMic Pro


  • Ideal for Video & DSLR Cameras
  • Integrated Shoemount/Shockmount
  • Level Switch: -10dB / 0dB / +20dB
  • High-Pass Filter Switch: 75Hz
  • Durable Multi-Strand Cable
  • 1/8″ (3.5mm) Output Connector
  • 9V Battery Powered

On Backorder

SKU: 11443 Categories: , ,

The Rode Stereo VideoMic Pro</B> builds on the success of the Rode VideoMic Pro & Stereo VideoMic with improved stereo reproduction, sound quality and ergonomic design. The Stereo VideoMic’s capsule feature a matched pair of 1/2″ cardioid condenser capsules, mounted in a coincident X/Y position for accurate stereo imagery and detail. The microphone’s small, ergonomic footprint features an integrated shock mounting system for superior isolation from vibration and mechanical noise. The multi-strand output cable is terminated with a 1/8″ (3.5mm) output connector and delivers significantly lower noise transference than traditional audio cable.

The included shoe mount features an integrated shockmount system for even further protection against handling noise. The Stereo VideoMic features a high pass filter switch at 75Hz for minimizing low frequency noise, and a -10dB Pad for maximizing headroom for capturing loud signals without distortion. The +20dB level boost switch is specifically designed to provide a higher quality signal with DSLR cameras. When activated, camera preamp level is reduced, resulting in a lower noise floor and much clearer recording.

  • Broadcast recording quality on-camera microphone
  • Matched pair 1/2″ condenser capsules in XY stereo configuration
  • Ultra lightweight, compact form factor
  • Two step High Pass Filter (flat, 75Hz)
  • Three position level control (-10dB, 0, +20dB)
  • 9V battery powered – over 100 hours use (alkaline)
  • Integrated shock mounting
  • Integrated foam windscreen
  • 3.5mm stereo mini-jack output
  • Billeted metal camera shoe mount with 3/8″ thread for easy boompole mounting
Package Weight 0.55 lbs
Package Dimensions 7.3 x 6.4 x 3.0 in

4.1 oz (117 g) (without battery)

Output Impedance


Dynamic Range

100dB (per IEC651)

Box Dimensions (LxWxH)

7.3 x 6.4 x 3.0″

Maximum Output

+4.2dBu (@ 1% THD into 1kΩ)

Power Supply

9V alkaline battery


2.6 x 4.25 x 5.1″ (66 x 108 x 130 mm)

Package Weight

0.55 lb

Polar Pattern

XY Cardioid (Coincident)


1/8″ (3.5mm) stereo mini-jack


-38dB re 1V/P (12.6mV @ 94dB SPL) ±2dB @ 1kHz


20dBA SPL (A – weighted per IEC651)

Signal to Noise Ratio

73dB SPL (A – weighted per IEC651)


Pressure Gradient, JFET impedance converter


134dB, max (1 kHz, 1% THD into 1kΩ)

Frequency Range

40Hz ~ 20,000Hz (selectable HPF@75Hz)


There are no reviews yet.

Be the first to review “Rode Stereo VideoMic Pro”