No products in the cart.
Rode VideoMic with Rycote Lyre Suspension System
- Directional Video Condenser Microphone
- Rycote Suspension System
- Mounts to Standard Camera Shoe
- 3.5mm Mini Plug
- Studio-Quality Sound
- 9V Battery Powered
The VideoMic with Rycote Lyre Suspension System from Rode is a shotgun microphone that can easily be mounted on a DSLR camera. It features a Rycote suspension system that attaches to the camera’s shoe. The VideoMic is lightweight, and when mounting on a camera it does not appear in the frame. The VideoMic can also mount to Rode’s boompoles for elevated audio capture. Its super-cardioid polar pattern attenuates sounds from the sides. The result is a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances.
The included Rycote Lyre is a non-elasticated suspension structure composed of a hard-wearing thermoplastic. It is more effective at acoustically decoupling microphones from unwanted vibrations, handling and cable-borne noise than elasticated suspensions. The lyre remains effective at a wide range of temperatures and is virtually indestructible. It will never wear out, sag, snap or require any rethreading to maintain its effectiveness.
An attached, coiled cable terminates to a 1/8″ (3.5mm) mini output connection. The VideoMic features a condenser element that utilizes a standard 9 Volt battery (sold separately). The microphone will run for approximately 100 hours on a single battery.
|Package Weight||0.85 lbs|
|Package Dimensions||11.7 x 5.3 x 3.4 in|
1/8″ (3.5 mm) stereo mini plug, male
6.21 oz (176 g)
|Dimensions (Ø x H x L)||
2.55 x 4.02 x 8.84″ (65 x 102 x 250 mm)
|Maximum Input Sound Level||
134 dB (@ 1% THD into 1kΩ)
|Box Dimensions (LxWxH)||
11.7 x 5.3 x 3.4″
74 dB (1 kHz @ 1 Pa; per IEC651, IEC268-15)
40 Hz to 20 kHz
@ 80 Hz, 12 dB/octave, selectable
|Dynamic Range (Typical)||
114 dB (per IEC651, IEC268-15)
-10 and -20 dB