Sony NPA-MQZ1K Multi Battery Adaptor Kit

$549.00

  • Mfr SKU: NPA-MQZ1K
  • For NP-FZ1000 & NP-FW50 Batteries
  • Holds up to Four NP-FZ100 Battery Packs
  • Rapidly Charge Batteries
  • Converts to Compact Two-Battery Pack
  • Two USB Ports for Charging Devices
  • Six 1/4″-20 Mounting Sockets
  • Comes w/ Two NP-FZ100 Batteries

Low in stock

Mfr SKU: NPA-MQZ1K

The Sony Multi Battery Adaptor Kit (NPA-MQZ1K) provides plenty of power for your shoot.  It can provide power to cameras that accept NP-FZ100 series or NP-FW50 series batteries, this adapter is able to supply power from up to four NP-FZ100 series battery packs for dramatically extended shooting times. It can also serve as a rapid charge, with a charging rate of 480 minutes for four batteries. Users can convert the adapter into a more compact two-battery adapter for a more travel-ready kit.

This Sony adaptor kit (NPA-MQZ1K) can charge other devices as well via its two USB ports. It also is equipped with a three-level LED indicator light for checking charge status along with six 1/4″-20 mounting sockets for mounting to various support systems. Additionally, it comes a total of 2 NP-FZ100 battery packs to help users get started.

Two NP-FZ100 batteries are included in the kit

For extended shooting

This battery adaptor can load four NP-FZ100 Z-series batteries and supports extended shooting.

Supply power to a camera compatible with Z- or W-series battery

This Multi Battery Adaptor Kit can connect and supply electric power to a camera that uses either an NP-FZ100 Z-series or NP-FW50 W-series battery. By removing the cover for Z-series battery, the power plate (figure [B]) fits cameras compatible with W-series battery.

Quickly charges NP-FZ100 batteries

This battery adaptor can quickly charge up to four NP-FZ100 Z-series batteries. via AC adaptor within about 480 minutes. Power charge condition is indicated in a 3-level LED when the “remaining battery power” check button is pressed.

Note: the NP-FW50 W-series batteries cannot be charged with this battery adaptor.

Select power supply or battery charge

DC OUT/CHARGE switch placed at the centre of the control panel allows you to choose either supplying power from the batteries or charging the batteries.

Equipped with two USB ports for power output

Camera/USB selector enables switching between DC OUT destinations to let you choose to supply electrical power to either the camera body or other electronic devices connected via USB ports.

Setting flexibility for varied shooting scenes

This battery adaptor provides three screw sockets on both top and bottom of the unit (a total of 6 sockets), allowing a flexible rig setup using a mounting plate and screws.

Turn into a more compact size

If you remove battery protector and put battery port covers into place, Multi Battery Adaptor turns into a smaller easy-to-carry adaptor for two batteries.

  • Dimensions (W × H × D): Approx. 123.4 x 67.8 x 66.2 mm (4 7/8 x 2 3/4 x 2 5/8 inches)

  • Weight: Approx. 400 g (14.2 oz) (Not including battery)

Dimensions

4.88 x 2.75 x 2.68″ / 123.4 x 67.8 x 66.2 mm

Weight

14.2 oz / 400 g

Reviews


There are no reviews yet.

Be the first to review “Sony NPA-MQZ1K Multi Battery Adaptor Kit”